null

Ford F150 Gen 2 3.5 Ecoboost HPFP Kit

MSRP: $1,699.00
$1,599.00
( saved $100.00 )
No reviews yet Write a Review
GDI + PFI WHP potential on Gasoline:
670
GDI + PFI WHP potential on E85:
530
Flow rate increase over stock:
36%
Recommended tuning suite(s):
HP Tuners, SCT
Geometric displacement:
1.22 cc/rev
Maximum operating pressure:
250 bar / 25 MPa / 3625 psi
Buy at:
Ecoboost 3.5 HPFP kit at SCTFlash.com
SKU:
H086-1757

***This HPFP kit is now available, please visit SCTFlash.com to purchase!***

What sets Nostrum apart:
 

  • Fully Laser Welded HPFP Construction  
  • Direct Bolt on Kit  
  • 100% dynamically tested  
  • Limited lifetime warranty 

Nostrum’s high pressure fuel pump (HPFP) for the 2017-2020 Ford F150, including the F150 Raptor, with the Gen 2 3.5L EcoBoost engine, is capable of flowing 36% more fuel than the factory fuel pump. The additional HPFP fuel flow allows you to maintain the factory 60/40 GDI/PFI split while increasing power levels even with stock GDI & PFI injectors. The added fuel capacity also allows you to dial in more boost earlier, resulting in a substantial increase in low end torque. The Nostrum HPFP is also ethanol compatible so you also have the added benefit of being able to run E85 or other ethanol blends.  Running ethanol is one of the best things you can do for your turbocharged vehicle, as it has a higher octane rating and is less prone to knock than 91/93 pump gas, and you have the potential to make more power as a result. We offer tuning support for HP Tuners and SCT software including preconfigured calibration data via SCT Value Files. 

Nostrum backs every part we sell with a limited lifetime warranty. All Nostrum products come complete with everything you need inside the box, including detailed installation instructions. Tuning guides are also available for your dealer or tuner. We have customer service and calibration engineers on staff to provide you with any support that you may need, from installation to tuning. 

 

What comes in the box: 

  • High pressure fuel pump with fully welded, stainless steel construction 
  • Pump mounting flange 
  • Installation hardware 
  • Flange alignment tool 
  • Protective caps to maintain fuel system cleanliness during the installation process 
  • Product data sheet with part number, serial number and pump flow data 
  • Detailed printed installation instructions 

Vehicle applications: 

  • 2017-2020 Ford F150 with Gen 2 3.5L EcoBoost V6 including the Ford Raptor 

Recommended tuners: 

  • ZFG Racing 
  • Five Star 
Join Our Nostrum Newsletter