Ford Fiesta ST 1.6 Ecoboost Fuel Bundle

MSRP: $2,623.00
( saved $425.00 )
No reviews yet Write a Review
WHP Potential on Gasoline:
540 WHP*
WHP Potential on E85:
440 WHP*
Tune requirement:
Recommended Tuning Suite:
Cobb, Ecu Illuminati
Max Operating Pressure:
240 Bar/24 MPa/ 3480 PSI
HPFP Geometric Displacement:
1.03 cc/rev
HPFP Flow Rate Increase Over Stock:
Injector Flow Rate Increase Over Stock:

What sets Nostrum apart:

  • Fully Laser Welded HPFP Construction 
  • The Biggest and Best 1.6 Ecoboost Injectors available
  • Double Teflon seal for increased injector reliability
  • Custom High Pressure Fuel Line 
  • 240 Bar capable with the included pressure sensor!
  • Uses Stock Low Pressure Feed Line 
  • Limited lifetime warranty  

Bring some spice to your Fiesta with the Nostrum fuel system! Our fuel bundle includes our High Flow HPFP, the all new High Flow injectors, and our upgraded pressure sensor which allows for 240 bar operation!

Flowing 36% more fuel than the stock HPFP, and fully tunable with Cobb, our HPFP unlocks the ability to make more low end torque and the ability to run full pump E85. Forget about blending at the pump or being constrained to a specific ethanol content! 

The big ones are finally here! Push the limits of the 1.6 with the largest DI injectors on the market. Flowing a massive 60% more fuel than the factory injectors, these allow you to run full E85 and make more peak horsepower than ever before - without the need for auxillary or port injection. Friends don't let friends do meth!

Gain more injector headroom with the included Nostrum upgraded fuel rail sensor! The factory fuel rail sensor is incapable of reading pressures beyond 20MPa, thus it is necessary to replace the factory sensor with the Nostrum Fuel Rail Pressure Sensor in order to take full advantage of the Nostrum Standard Bore Plus high pressure fuel pump, which is capable of operating at pressures up to 24MPa (240 Bar, or 3480 psi). Going from 200 to 240 Bar results in an additional 10% increase in injector flow!

Every Nostrum manufactured part is backed by a limited lifetime warranty. Our products are comprehensive solutions that come complete with everything you need inside the box, including detailed installation instructions. Tuning guides are also available for your dealer or tuner. We have customer service and calibration engineers on staff to provide you with any support that you may need, from installation to tuning.

What comes in the box:

  • Nostrum 1.6 Ecoboost High Pressure Fuel Pump
  • Accessories needed for HPFP installation are provided, including: mounting flange, flange alignment tool, Mounting bolts, LP line adapter, fixture for DIY bending of the stock line
  • Set of 4 Nostrum High Flow Injectors with double teflon seal
  • Upgraded fuel rail pressure sensor
  • HPFP Install Guide provided 

Vehicle applications:

  • (14-19) 1.6L EcoBoost  Ford Fiesta ST 

Recommended tuner:

Dyno graph sponsorship results:

Phul Performance made a very healthy 430whp on full pump E85 fueled solely by Nostrum's HPFP, upgraded pressure sensor, and the all new High Flow Injectors! Gone are the days of ethanol tube testers, phone calculators and blending at the pump!

No description available.

*Horsepower and Torque numbers are approximate and can vary significantly depending on numerous factors including what supporting upgrades are done to the vehicle, ambient temperature, elevation, road surface, tire selection & condition, fuel octane and quality, vehicle weight, and more.  The advertised numbers herein are based on optimal conditions and utilizing proper supporting modifications.  Your results may vary. 


  • I see a lot of mentions about OEM equivalent spray patterns. What does that mean and why is it important?

While increasing flow rate is critical to making more horsepower, there are other factors to consider when choosing fuel system upgrades. A bigger injector isn’t always a better injector! It can flow a large volume of fuel at WOT, but if the spray pattern is poor, you can expect poor idle quality, poor drivability, increased knock propensity, soot, NVH (noise vibration harshness,) and tuning difficulty. Additionally, the wrong spray pattern can result in liquid fuel impinging in the cylinder walls, causing oil dilution, which increases mechanical wear to internal engine components.

Nostrum has invested significant time and resources into acquiring the equipment and machinery necessary to deliver an OEM level of quality on our injectors. Our spray patternation and arc flash machines (images below) give us an unparalleled look at how an OEM injector is designed and how it operates.  Our engineers design and develop injectors to optimally interact with engine air flow inside the combustion chamber to improve fuel evaporation and create a homogenous air-fuel mixture that results in a higher combustion quality. For you, this means that you can expect our injectors to perform at their absolute best regardless of what you are asking from them, from daily driver duty to setting new ¼ mile records.

Comparison of the Nostrum High Flow 1.6 Ecoboost injector (left) vs Stock 1.6 Ecoboost injector (right)

Arc Flash imaging of Nostrum Injector spray plume:



Join Our Nostrum Newsletter